Sunday, February 2, 2014

Sweetheart Sweater

I've been saving this sweater for just the right refashion and just a week ago I was struck with the most amazing idea to fix it!!! It was a super simple idea, and one I'm sure I've seen around and simply didn't put two and two together on...but hey, at least it came to me eventually ;) AND just in time for Valentine's day! You'll see why that's relevant...

Here's what I started with. A flesh tone wool cardigan (J.Crew) with the most lovely little buttons that I thrifted sometime last year (ish).

As you can see from the bottom right photo, it also came with some small holes in the front. They were all localized to this side and within a fairly small space and one had already been mended (though that came undone and I had to fix that one again). I closed up these holes using similar colored thread and a thin needle by gathering up the loose loops of the fine knit and gathering them around the hole so that when I pulled everything taut and tied off the thread it closed the hole right up. This is a pretty visible mend, though it didn't much matter as I was planning on camouflaging it anyhow.

So, I gathered up my supplies...the sweater (obviously) and some stabilizer (thrifted $.25), and black embroidery floss along with a sharp embroidery needle.
I did, in fact, start with much more embroidery floss ;) This was taken after completing the project!
I cut the stabilizer into tiny little squares to start off, then started playing around with different stitch designs trying to decide what would look best. I settled on what I was HOPING would look good and got to work!

I laid my little squares of stabilizer on the backside of the front panels one at a time then stitched my shape of choice, first where the holes had been mended, then continued from there to incorporate them into an overall layout that was "uniform" but imperfect :). I'm going with a V shape...

As you can see, (2)I placed the stabilizer, (3)inserted the needle from wrong side out then back to the wrong side at an angle, (4)pulled the floss through and (5)checked the front of the sweater to ensure that it looked good. Next, (6)I started the needle back down at the bottom of the V and angled out in the opposite direction, (7)pulled it through, (8)checked it, and finally (9)knotted it in place. I did this over and over and over again (about 40 times per side of the front of the cardigan).

Now look over your work, and admire! I still need to decide if I'll line the front of the sweater now, and if I do I'll use a pre-washed muslin hand-sewn in place tacking it down from time to time to the stabilizer in between the two layers. But we'll see. I plan on wearing it buttoned up, however for variety of use, I'll need to line it.

I adore how the tiny V's look line mini hearts now all over the front of this cardi, and though the color before didn't look great on me, with the simple addition of the contrasting black embroidery it has become so much more flattering (even on my winter skin!).

A little pop of color on the lips and this is Valentine's Day ready (whether the husband and I get to go on a date or not). Any signs of mended holes are completely gone and this sweet little number is ready to be added into my wardrobe rotation! I think I'll be trying it on over brightly colored camisoles to see what a pop of color underneath will add, as well.

No major changes to shape or size or even function (as it has remained a cardigan) but its use value has skyrocketed with a little mending and camouflaging :-). And I am pleased!

Here's one last look at the before and after:


Hope this helps you see the potential in some of your clothes that start to go holey...there is hope for them yet! Or for a boring sweater or cardigan that could use a little pop!

Peace,
Andrea

10 comments:

  1. Great idea! I have a cardi that's been hanging in my closet for far too long and very little use. Totally copying you!

    ReplyDelete
    Replies
    1. Go for it, Bethany :) I'd love to see how it comes out!

      Delete
  2. Oh my goodness, that turned out adorable!

    www.dressupnotdown.blogspot.com

    ReplyDelete
  3. At first I thought you cut tiny hearts, but you sewed them all on! Turned out lovely :)

    ReplyDelete
    Replies
    1. Thanks Agy, I appreciate it...yeah I can't imagine cutting out hearts that tiny ;)

      Delete
  4. This is a great idea for fixing a beautiful garment with holes. I did want to ask why you use stabilizer instead of just stitching the design directly to the sweater. I'm asking because I would have skipped the stabilizer step (yes I'm lazy) and maybe would have ended up with a less than stellar refashion.

    ReplyDelete
    Replies
    1. Great question, American Nanny! A stabilizer is used for embroidery on another fabric to strengthen the fabric. They are much more important when doing perhaps heavier/denser stitching than I did, as the needle can do a bit of damage to the base fabric. The stabilizer will protect the delicate knit from pulling and stretching where I've stitched the v's, hopefully deterring any further pulls that would lead to holes. If you have a sturdier knit, you could probably do away with it (and I'm just as lazy), but this delicate wool knit inspired a bit of extra caution on my part ;).

      Delete
  5. This is amazing! I have a brown one that I think will look great with something orange-y! Thanks for the cool tip! I have a small question, though.. why do I have to use those little stabilizers? What would happen if I just did it without them?

    ReplyDelete
    Replies
    1. Hey nadiareads1! Thanks for stopping by :) I used the stabilizer so that when laundering or wearing, if the embroidery floss gets caught it wouldn't pull the fine knit of this sweater. It's very delicate. It's not absolutely necessary, but it is recommended for certain types of embroidery applications. Something simple and fairly sparse like this may not need it on a thicker or stronger knit.

      Delete